Quality & testing

Trust, supported by measurable performance.

Our quality story begins with clean fibre, controlled processing and transparent, batch-relevant testing.

Latest independent testing

CIRCOT test
highlights.

Two submitted absorbent cotton samples were tested by ICAR–Central Institute for Research on Cotton Technology, Mumbai, as per IP 2010.

5 / 6 secAbsorbency — samples A / B
24.3 / 24.5Water holding capacity, g/g — A / B
NilForeign fibres, fluorescence & colouring matter
Report context: Fibre Test Report No. PT/F-26-50, dated 27 May 2026. Samples F-263480 and F-263481 were received 12 May 2026 and tested 12–27 May 2026. Results pertain only to the submitted samples; the institute did not draw the samples.
Sample-level detail

More than fast absorption.

Both samples were described as white fibres with average staple length over 10 mm. Each fibre was identified as consisting of a single cell.

Tested values also included ether-soluble matter of 0.41% / 0.32%, water-soluble matter of 0.43% / 0.43%, sulphated ash of 0.42% / 0.44%, and loss on drying of 6.7% / 6.5% for samples A / B.

Observed as Nil

Foreign fibres
Fluorescence
Colouring matter
Surface-active substances

Acidity/alkalinity observations differed between the two submitted samples; request the complete report context when evaluating a batch.

ISO 13485 Quality Management System mark supplied by Whitenest
Quality systems

ISO 13485 focus

Medical-device quality management places emphasis on documented processes, risk awareness and consistent product realization.

ISO mark supplied by Whitenest. Buyers may request current certification scope and supporting documentation during due diligence.

Our quality approach

From fibre to finished roll.

Input selection

Cotton fibres chosen for the cleanliness, texture and absorption characteristics required by the product.

Controlled processing

Cleaning, bleaching and fibre preparation directed toward uniformity and hygiene.

Finished-product checks

Relevant physical and chemical parameters reviewed against the intended specification.

Need technical documentation for procurement?

Tell us your market and quality-document requirements when you enquire.